Free ghost SVG

Ghost with arms raised SVG

Ghost with arms raised, as a solid black shape — Ghost with arms raised. The preview is the SVG file itself.

A ghost caught mid-boo, both arms thrown up and mouth wide open. The long hem has three deep lobes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	90 × 100 mm (3.55 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	495 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	88 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,812 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.9 × 1 in (23 × 25 mm)	Over 1.5 mm	126 mm	110	Vinyl, card and thin sheet
1.8 × 2 in (46 × 51 mm)	Over 3 mm	251 mm	30	Any material, including 3 mm wood and acrylic
2.71 × 3 in (69 × 76 mm)	Over 4.6 mm	377 mm	12	Any material, including 3 mm wood and acrylic
3.61 × 4 in (92 × 102 mm)	Over 6.1 mm	503 mm	6	Any material, including 3 mm wood and acrylic
5.41 × 6 in (137 × 152 mm)	Over 9.1 mm	754 mm	2	Any material, including 3 mm wood and acrylic
7.22 × 8 in (183 × 203 mm)	Over 12 mm	1,006 mm	1	Any material, including 3 mm wood and acrylic
10.82 × 12 in (275 × 305 mm)	Over 18 mm	1,509 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ghost SVG files

← Swooping ghost All 18 ghosts Waving ghost →