Free ghost SVG

Waving ghost SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Waving ghost, as a solid black shape
Waving ghost. The preview is the SVG file itself.

A friendly ghost leaning to one side with one arm up in a wave and a wink. A good one for a welcome sign or a party invitation.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length471 mm at this size
Narrowest part4.9 mm at this size
Nodes108 curve and line segments

Measured from the file. PNG: 2,000 × 1,967 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)1.2 mm120 mm100Vinyl, card and thin sheet
2 × 1.97 in (51 × 50 mm)2.5 mm239 mm25Vinyl, card and thin sheet
3 × 2.95 in (76 × 75 mm)3.7 mm359 mm9Any material, including 3 mm wood and acrylic
4 × 3.93 in (102 × 100 mm)5 mm479 mm4Any material, including 3 mm wood and acrylic
6 × 5.9 in (152 × 150 mm)7.5 mm718 mm2Any material, including 3 mm wood and acrylic
8 × 7.86 in (203 × 200 mm)10 mm957 mm1Any material, including 3 mm wood and acrylic
12 × 11.8 in (305 × 300 mm)15 mm1,436 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ghost SVG files

← Ghost with arms raised All 18 ghosts Tall draped sheet ghost →