Free game controller SVG

Cute game controller with a face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute game controller with a face, as a solid black shape
Cute game controller with a face. The preview is the SVG file itself.

A round-gripped pad with two eyes, a smile and rosy cheeks where the sticks would be, tipped to one side. For a child’s first console, party bags and stickers.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length487 mm at this size
Narrowest part1 mm at this size
Nodes82 curve and line segments

Measured from the file. PNG: 2,000 × 1,323 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.25 mm124 mm140Too fine for most machines
2 × 1.3 in (51 × 33 mm)0.51 mm247 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)0.76 mm371 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.59 in (102 × 66 mm)1 mm495 mm8Vinyl, card and thin sheet
6 × 3.89 in (152 × 99 mm)1.5 mm742 mm2Vinyl, card and thin sheet
8 × 5.18 in (203 × 132 mm)2 mm990 mm2Vinyl, card and thin sheet
12 × 7.78 in (305 × 198 mm)3 mm1,484 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More game controller SVG files

← Split game controller name frame All 17 game controllers Layered game controller in four colours →