Free game controller SVG

Wired game controller with a curling cord SVG

Wired game controller with a curling cord, as a solid black shape — Wired game controller with a curling cord. The preview is the SVG file itself.

The flat retro pad on its lead: the cord leaves the top edge, turns one loop and ends in a square plug. Tilted a little, as if it had just been put down.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.32 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	804 mm at this size
Narrowest part	2.3 mm at this size
Nodes	80 curve and line segments

Measured from the file. PNG: 2,000 × 1,700 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.58 mm	204 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.69 in (51 × 43 mm)	1.2 mm	408 mm	30	Vinyl, card and thin sheet
3 × 2.53 in (76 × 64 mm)	1.8 mm	613 mm	12	Vinyl, card and thin sheet
4 × 3.38 in (102 × 86 mm)	2.3 mm	817 mm	6	Vinyl, card and thin sheet
6 × 5.06 in (152 × 129 mm)	3.5 mm	1,225 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.75 in (203 × 172 mm)	4.7 mm	1,634 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.13 in (305 × 257 mm)	7 mm	2,451 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More game controller SVG files

← Retro game controller All 17 game controllers Handheld video game console →