Free game controller SVG

Game controller with a bow SVG

Game controller with a bow, as a solid black shape — Game controller with a bow. The preview is the SVG file itself.

The two-handed pad with a big bow sitting on top, a crease cut into each wing. For a girl who plays, on a birthday shirt, a bedroom sign or the lid of a console box.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 84 mm (3.94 × 3.32 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	17: 1 outer edge and 16 cut-outs
Cut length	769 mm at this size
Narrowest part	1.9 mm at this size
Nodes	168 curve and line segments

Measured from the file. PNG: 2,000 × 1,700 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.84 in (25 × 21 mm)	0.48 mm	195 mm	110	Too fine for most machines
2 × 1.69 in (51 × 43 mm)	0.97 mm	391 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.53 in (76 × 64 mm)	1.4 mm	586 mm	12	Vinyl, card and thin sheet
4 × 3.38 in (102 × 86 mm)	1.9 mm	781 mm	6	Vinyl, card and thin sheet
6 × 5.06 in (152 × 129 mm)	2.9 mm	1,172 mm	2	Vinyl, card and thin sheet
8 × 6.75 in (203 × 172 mm)	3.9 mm	1,563 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.13 in (305 × 257 mm)	5.8 mm	2,344 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More game controller SVG files

← Game controller wearing a headset All 17 game controllers Game controller with a crown →