Free game controller SVG

Game controller outline SVG

Game controller outline, drawn as a line — Game controller outline. The preview is the SVG file itself.

The two-handed pad as an even line, with the cross pad, four buttons and both thumbsticks drawn as open shapes joined to nothing. Separate pieces by design, for colouring pages and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	16: 8 outer edges and 8 cut-outs
Cut length	994 mm at this size
Narrowest part	1.6 mm at this size
Nodes	169 curve and line segments

Measured from the file. PNG: 2,000 × 1,342 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.41 mm	252 mm	140	Too fine for most machines
2 × 1.32 in (51 × 33 mm)	0.81 mm	505 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.2 mm	757 mm	15	Vinyl, card and thin sheet
4 × 2.63 in (102 × 67 mm)	1.6 mm	1,010 mm	8	Vinyl, card and thin sheet
6 × 3.95 in (152 × 100 mm)	2.4 mm	1,515 mm	2	Vinyl, card and thin sheet
8 × 5.26 in (203 × 134 mm)	3.3 mm	2,020 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.9 in (305 × 201 mm)	4.9 mm	3,030 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More game controller SVG files

← Simple game controller icon All 17 game controllers Retro game controller →