Free Fur Mama SVG

Fur Mama outline lettering SVG

Fur Mama outline lettering, drawn as a line — Fur Mama outline lettering. The preview is the SVG file itself.

“Fur Mama” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.59 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	18: 9 outer edges and 9 cut-outs
Cut length	1,368 mm at this size
Narrowest part	1.4 mm at this size
Nodes	340 curve and line segments

Measured from the file. PNG: 2,000 × 1,340 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.36 mm	347 mm	140	Too fine for most machines
2 × 1.31 in (51 × 33 mm)	0.71 mm	695 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.1 mm	1,042 mm	15	Vinyl, card and thin sheet
4 × 2.63 in (102 × 67 mm)	1.4 mm	1,390 mm	8	Vinyl, card and thin sheet
6 × 3.94 in (152 × 100 mm)	2.1 mm	2,085 mm	2	Vinyl, card and thin sheet
8 × 5.26 in (203 × 134 mm)	2.8 mm	2,780 mm	2	Vinyl, card and thin sheet
12 × 7.88 in (305 × 200 mm)	4.3 mm	4,170 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fur Mama SVG files

← Fur Mama with hearts All 12 Fur Mama designs Fur Mama stencil plate →