Free Fur Mama SVG

Fur Mama in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fur Mama in Lilita One, as a solid black shape
Fur Mama in Lilita One. The preview is the SVG file itself.

“Fur Mama” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces7 separate pieces
Outlines to cut9: 7 outer edges and 2 cut-outs
Cut length745 mm at this size
Narrowest part3.9 mm at this size
Nodes189 curve and line segments

Measured from the file. PNG: 2,000 × 1,373 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.99 mm189 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)2 mm378 mm35Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)3 mm568 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 68 mm)4 mm757 mm8Any material, including 3 mm wood and acrylic
6 × 4.04 in (152 × 103 mm)5.9 mm1,135 mm2Any material, including 3 mm wood and acrylic
8 × 5.39 in (203 × 137 mm)7.9 mm1,514 mm2Any material, including 3 mm wood and acrylic
12 × 8.09 in (305 × 205 mm)12 mm2,271 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fur Mama SVG files

← Fur Mama in Kaushan Script All 13 Fur Mama designs Fur Mama in Alfa Slab One →