Free Fur Mama SVG

Fur Mama in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fur Mama in Lobster, as a solid black shape
Fur Mama in Lobster. The preview is the SVG file itself.

“Fur Mama” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 85 mm (3.94 × 3.35 in), scales to any size
Pieces4 separate pieces
Outlines to cut6: 4 outer edges and 2 cut-outs
Cut length916 mm at this size
Narrowest part1.6 mm at this size
Nodes185 curve and line segments

Measured from the file. PNG: 2,000 × 1,712 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.41 mm233 mm110Too fine for most machines
2 × 1.7 in (51 × 43 mm)0.81 mm465 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.55 in (76 × 65 mm)1.2 mm698 mm12Vinyl, card and thin sheet
4 × 3.4 in (102 × 86 mm)1.6 mm931 mm6Vinyl, card and thin sheet
6 × 5.1 in (152 × 130 mm)2.4 mm1,396 mm2Vinyl, card and thin sheet
8 × 6.8 in (203 × 173 mm)3.3 mm1,861 mm1Any material, including 3 mm wood and acrylic
12 × 10.2 in (305 × 259 mm)4.9 mm2,792 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fur Mama SVG files

← Fur Mama in Pacifico All 13 Fur Mama designs Fur Mama in Kaushan Script →