Free Florida SVG

Split Florida for a name SVG

Split Florida for a name, as a solid black shape — Split Florida for a name. The preview is the SVG file itself.

Florida divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Florida are loose pieces: line them up with transfer tape.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 98 mm (3.94 × 3.84 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	393 mm at this size
Narrowest part	2 mm at this size
Nodes	250 curve and line segments

Measured from the file. PNG: 2,000 × 1,954 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.98 in (25 × 25 mm)	0.51 mm	100 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.95 in (51 × 50 mm)	1 mm	200 mm	25	Vinyl, card and thin sheet
3 × 2.93 in (76 × 74 mm)	1.5 mm	299 mm	9	Vinyl, card and thin sheet
4 × 3.9 in (102 × 99 mm)	2 mm	399 mm	4	Vinyl, card and thin sheet
6 × 5.86 in (152 × 149 mm)	3 mm	599 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.81 in (203 × 198 mm)	4.1 mm	799 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.71 in (305 × 297 mm)	6.1 mm	1,198 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Florida SVG files

← Florida with its name beneath All 9 Florida designs Florida in stripes →