Free Florida SVG

Florida cut from a disc SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Florida cut from a disc, as a solid black shape
Florida cut from a disc. The preview is the SVG file itself.

A disc 100 mm across with the shape of Florida cut out of its middle. One piece: Florida shows in whatever is behind it, on a coaster, a tree ornament or a round decal.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length528 mm at this size
Narrowest part3.9 mm at this size
Nodes236 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.99 mm134 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)2 mm268 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)3 mm402 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)4 mm536 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.9 mm805 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)7.9 mm1,073 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)12 mm1,609 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Florida SVG files

← Florida state outline All 9 Florida designs Florida cut from a square tile →