Free Florida SVG

Florida cut from a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Florida cut from a heart, as a solid black shape
Florida cut from a heart. The preview is the SVG file itself.

A heart 100 mm wide with the shape of Florida cut out of it, as large as the heart holds with 6 mm to spare all round. One piece, for a Florida gift tag, a keyring or the pocket of a shirt.

What is in the file

Size100 × 88 mm (3.94 × 3.47 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length428 mm at this size
Narrowest part1.6 mm at this size
Nodes213 curve and line segments

Measured from the file. PNG: 2,000 × 1,773 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.41 mm109 mm110Too fine for most machines
2 × 1.76 in (51 × 45 mm)0.81 mm217 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.65 in (76 × 67 mm)1.2 mm326 mm12Vinyl, card and thin sheet
4 × 3.53 in (102 × 90 mm)1.6 mm435 mm6Vinyl, card and thin sheet
6 × 5.29 in (152 × 134 mm)2.4 mm652 mm2Vinyl, card and thin sheet
8 × 7.06 in (203 × 179 mm)3.3 mm870 mm1Any material, including 3 mm wood and acrylic
12 × 10.58 in (305 × 269 mm)4.9 mm1,305 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Florida SVG files

← Florida cut from a square tile All 9 Florida designs Florida with its name beneath →