Free Florida SVG

Florida with its name beneath SVG

Florida with its name beneath, as a solid black shape — Florida with its name beneath. The preview is the SVG file itself.

The solid state with “FLORIDA” in narrow capitals under it. The letters of “Florida” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	85 × 100 mm (3.34 × 3.94 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	13: 9 outer edges and 4 cut-outs
Cut length	616 mm at this size
Narrowest part	1.9 mm at this size
Nodes	370 curve and line segments

Measured from the file. PNG: 1,708 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.85 × 1 in (22 × 25 mm)	0.48 mm	156 mm	110	Too fine for most machines
1.7 × 2 in (43 × 51 mm)	0.97 mm	313 mm	30	Fine detail: vinyl and paper only, weed with care
2.54 × 3 in (65 × 76 mm)	1.4 mm	469 mm	12	Vinyl, card and thin sheet
3.39 × 4 in (86 × 102 mm)	1.9 mm	626 mm	6	Vinyl, card and thin sheet
5.09 × 6 in (129 × 152 mm)	2.9 mm	939 mm	2	Vinyl, card and thin sheet
6.78 × 8 in (172 × 203 mm)	3.9 mm	1,252 mm	1	Any material, including 3 mm wood and acrylic
10.18 × 12 in (258 × 305 mm)	5.8 mm	1,878 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Florida SVG files

← Florida cut from a heart All 9 Florida designs Split Florida for a name →