Free fleur de lis SVG

Fleur de lis monogram frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fleur de lis monogram frame, as a solid black shape
Fleur de lis monogram frame. The preview is the SVG file itself.

A double ring set into the middle of the fleur de lis, leaving a clear round space about 27 mm across for a single initial. The petals run out from behind the ring.

What is in the file

Size94 × 100 mm (3.68 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length875 mm at this size
Narrowest part1.7 mm at this size
Nodes191 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,875 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.43 mm222 mm100Too fine for most machines
1.87 × 2 in (47 × 51 mm)0.86 mm445 mm25Fine detail: vinyl and paper only, weed with care
2.81 × 3 in (71 × 76 mm)1.3 mm667 mm12Vinyl, card and thin sheet
3.74 × 4 in (95 × 102 mm)1.7 mm889 mm6Vinyl, card and thin sheet
5.61 × 6 in (142 × 152 mm)2.6 mm1,333 mm2Vinyl, card and thin sheet
7.48 × 8 in (190 × 203 mm)3.5 mm1,778 mm1Any material, including 3 mm wood and acrylic
11.22 × 12 in (285 × 305 mm)5.2 mm2,667 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fleur de lis SVG files

← Split fleur de lis with a name bar All 13 fleurs de lis Fleur de lis crown →