Free fleur de lis SVG

Fleur de lis crown SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fleur de lis crown, as a solid black shape
Fleur de lis crown. The preview is the SVG file itself.

A heraldic crown: a jewelled band carrying three fleur de lis points, the middle one tallest, with a pearl on a spike between each pair.

What is in the file

Size100 × 53 mm (3.94 × 2.09 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length717 mm at this size
Narrowest part2.7 mm at this size
Nodes199 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,096 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.53 in (25 × 13 mm)0.69 mm182 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.06 in (51 × 27 mm)1.4 mm364 mm45Vinyl, card and thin sheet
3 × 1.59 in (76 × 40 mm)2.1 mm546 mm18Vinyl, card and thin sheet
4 × 2.12 in (102 × 54 mm)2.7 mm728 mm10Vinyl, card and thin sheet
6 × 3.18 in (152 × 81 mm)4.1 mm1,093 mm3Any material, including 3 mm wood and acrylic
8 × 4.24 in (203 × 108 mm)5.5 mm1,457 mm2Any material, including 3 mm wood and acrylic
12 × 6.36 in (305 × 162 mm)8.2 mm2,185 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fleur de lis SVG files

← Fleur de lis monogram frame All 13 fleurs de lis Distressed fleur de lis →