Free fleur de lis SVG

Three fleurs de lis SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three fleurs de lis, as a solid black shape
Three fleurs de lis. The preview is the SVG file itself.

Three small fleurs de lis set two above one, as on the old royal arms of France. They are three loose pieces, so they can also be cut apart and scattered.

What is in the file

Size96 × 100 mm (3.77 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length1,043 mm at this size
Narrowest part3.4 mm at this size
Nodes390 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,919 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.86 mm265 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.7 mm530 mm25Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)2.6 mm795 mm9Vinyl, card and thin sheet
3.83 × 4 in (97 × 102 mm)3.5 mm1,060 mm6Any material, including 3 mm wood and acrylic
5.75 × 6 in (146 × 152 mm)5.2 mm1,590 mm2Any material, including 3 mm wood and acrylic
7.66 × 8 in (195 × 203 mm)6.9 mm2,119 mm1Any material, including 3 mm wood and acrylic
11.5 × 12 in (292 × 305 mm)10 mm3,179 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fleur de lis SVG files

← Fleur de lis cut out of a shield All 13 fleurs de lis Classic fleur de lis →