Free farmer SVG

Farmer straw hat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Farmer straw hat, as a solid black shape
Farmer straw hat. The preview is the SVG file itself.

A wide straw hat from the front, with a double band round the crown, three creases in the top and short weave lines along the edge of the brim. The same on both sides.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length795 mm at this size
Narrowest part2 mm at this size
Nodes119 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,290 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.51 mm202 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.26 in (51 × 32 mm)1 mm404 mm40Vinyl, card and thin sheet
3 × 1.89 in (76 × 48 mm)1.5 mm606 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)2 mm808 mm8Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)3 mm1,212 mm3Any material, including 3 mm wood and acrylic
8 × 5.05 in (203 × 128 mm)4.1 mm1,615 mm2Any material, including 3 mm wood and acrylic
12 × 7.57 in (305 × 192 mm)6.1 mm2,423 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More farmer SVG files

← Farmer tools on a rack All 15 farmers Rice farmer hat with a chin cord →