Free farmer SVG

Farmer face with a straw in the mouth SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Farmer face with a straw in the mouth, as a solid black shape
Farmer face with a straw in the mouth. The preview is the SVG file itself.

Head and shoulders of a farmer: a straw hat, a smile, an open collar, two overall straps with buttons and an ear of wheat held in the corner of the mouth.

What is in the file

Size100 × 97 mm (3.94 × 3.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length915 mm at this size
Narrowest part2.4 mm at this size
Nodes135 curve and line segments

Measured from the file. PNG: 2,000 × 1,933 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.61 mm232 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.93 in (51 × 49 mm)1.2 mm465 mm25Vinyl, card and thin sheet
3 × 2.89 in (76 × 74 mm)1.8 mm697 mm9Vinyl, card and thin sheet
4 × 3.86 in (102 × 98 mm)2.4 mm930 mm6Vinyl, card and thin sheet
6 × 5.79 in (152 × 147 mm)3.7 mm1,394 mm2Any material, including 3 mm wood and acrylic
8 × 7.72 in (203 × 196 mm)4.9 mm1,859 mm1Any material, including 3 mm wood and acrylic
12 × 11.58 in (305 × 294 mm)7.3 mm2,789 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More farmer SVG files

← Farmer driving a tractor All 15 farmers Farmer’s wife with a basket of eggs →