Free farmer SVG

Farmer driving a tractor SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Farmer driving a tractor, as a solid black shape
Farmer driving a tractor. The preview is the SVG file itself.

A farmer in a straw hat sitting on a plain open tractor, one hand on the wheel. Big rear tyre, small front tyre, an upright exhaust and a mudguard over the back wheel.

What is in the file

Size91 × 100 mm (3.59 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length995 mm at this size
Narrowest part2.4 mm at this size
Nodes210 curve and line segments

Measured from the file. PNG: 1,829 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.61 mm253 mm100Fine detail: vinyl and paper only, weed with care
1.82 × 2 in (46 × 51 mm)1.2 mm505 mm30Vinyl, card and thin sheet
2.73 × 3 in (69 × 76 mm)1.8 mm758 mm12Vinyl, card and thin sheet
3.64 × 4 in (93 × 102 mm)2.4 mm1,011 mm6Vinyl, card and thin sheet
5.47 × 6 in (139 × 152 mm)3.7 mm1,516 mm2Any material, including 3 mm wood and acrylic
7.29 × 8 in (185 × 203 mm)4.9 mm2,022 mm1Any material, including 3 mm wood and acrylic
10.93 × 12 in (278 × 305 mm)7.3 mm3,033 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More farmer SVG files

← Farmer bib overalls All 15 farmers Farmer face with a straw in the mouth →