Free Family SVG

Family in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Family in Alfa Slab One, as a solid black shape
Family in Alfa Slab One. The preview is the SVG file itself.

“Family” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 28 mm (3.94 × 1.1 in), scales to any size
Pieces7 separate pieces
Outlines to cut8: 7 outer edges and 1 cut-out
Cut length564 mm at this size
Narrowest part2.5 mm at this size
Nodes132 curve and line segments

Measured from the file. PNG: 2,000 × 613 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.64 mm143 mm250Fine detail: vinyl and paper only, weed with care
2 × 0.56 in (51 × 14 mm)1.3 mm287 mm80Vinyl, card and thin sheet
3 × 0.84 in (76 × 21 mm)1.9 mm430 mm33Vinyl, card and thin sheet
4 × 1.12 in (102 × 28 mm)2.5 mm573 mm18Vinyl, card and thin sheet
6 × 1.67 in (152 × 43 mm)3.8 mm860 mm6Any material, including 3 mm wood and acrylic
8 × 2.23 in (203 × 57 mm)5.1 mm1,146 mm5Any material, including 3 mm wood and acrylic
12 × 3.35 in (305 × 85 mm)7.6 mm1,719 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Family SVG files

← Family in Lilita One All 13 Family designs Family in Amatic SC →