Free Family SVG

Family in block capitals SVG

Family in block capitals, as a solid black shape
Family in block capitals. The preview is the SVG file itself.

“FAMILY” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 34 mm (3.94 × 1.35 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length799 mm at this size
Narrowest part3.5 mm at this size
Nodes59 curve and line segments

Measured from the file. PNG: 2,000 × 737 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.34 in (25 × 9 mm)0.89 mm203 mm220Fine detail: vinyl and paper only, weed with care
2 × 0.69 in (51 × 17 mm)1.8 mm406 mm65Vinyl, card and thin sheet
3 × 1.03 in (76 × 26 mm)2.7 mm609 mm27Vinyl, card and thin sheet
4 × 1.37 in (102 × 35 mm)3.6 mm812 mm14Any material, including 3 mm wood and acrylic
6 × 2.06 in (152 × 52 mm)5.3 mm1,218 mm5Any material, including 3 mm wood and acrylic
8 × 2.74 in (203 × 70 mm)7.1 mm1,624 mm4Any material, including 3 mm wood and acrylic
12 × 4.12 in (305 × 105 mm)11 mm2,435 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Family SVG files

← Family in Amatic SC All 12 Family designs Family with a swash underline →