Free Family SVG

Family stencil plate SVG

Family stencil plate, as a solid black shape — Family stencil plate. The preview is the SVG file itself.

A rounded plate with “FAMILY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 40 mm (3.94 × 1.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	827 mm at this size
Narrowest part	1.2 mm at this size
Nodes	71 curve and line segments

Measured from the file. PNG: 2,000 × 838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.4 in (25 × 10 mm)	0.3 mm	210 mm	200	Too fine for most machines
2 × 0.79 in (51 × 20 mm)	0.61 mm	420 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.19 in (76 × 30 mm)	0.91 mm	630 mm	24	Fine detail: vinyl and paper only, weed with care
4 × 1.58 in (102 × 40 mm)	1.2 mm	840 mm	12	Vinyl, card and thin sheet
6 × 2.38 in (152 × 60 mm)	1.8 mm	1,260 mm	4	Vinyl, card and thin sheet
8 × 3.17 in (203 × 80 mm)	2.4 mm	1,680 mm	3	Vinyl, card and thin sheet
12 × 4.75 in (305 × 121 mm)	3.7 mm	2,521 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Family SVG files

← Family outline lettering All 12 Family designs Family with a drop shadow →