Free Family SVG

Family in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Family in Amatic SC, as a solid black shape
Family in Amatic SC. The preview is the SVG file itself.

“Family” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 47 mm (3.94 × 1.83 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length879 mm at this size
Narrowest part2.8 mm at this size
Nodes254 curve and line segments

Measured from the file. PNG: 2,000 × 971 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.71 mm223 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.93 in (51 × 24 mm)1.4 mm447 mm50Vinyl, card and thin sheet
3 × 1.39 in (76 × 35 mm)2.1 mm670 mm21Vinyl, card and thin sheet
4 × 1.86 in (102 × 47 mm)2.8 mm893 mm10Vinyl, card and thin sheet
6 × 2.79 in (152 × 71 mm)4.3 mm1,340 mm4Any material, including 3 mm wood and acrylic
8 × 3.72 in (203 × 94 mm)5.7 mm1,786 mm3Any material, including 3 mm wood and acrylic
12 × 5.58 in (305 × 142 mm)8.5 mm2,679 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Family SVG files

← Family in Alfa Slab One All 13 Family designs Family in block capitals →