Free emoji SVG

Kiss emoji blowing a heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Kiss emoji blowing a heart, as a solid black shape
Kiss emoji blowing a heart. The preview is the SVG file itself.

A winking face with puckered lips, blowing a heart that floats at its lower right and overlaps the edge. The heart is welded on, with a seam where it crosses the face.

What is in the file

Size100 × 96 mm (3.94 × 3.79 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length589 mm at this size
Narrowest part3.1 mm at this size
Nodes79 curve and line segments

Measured from the file. PNG: 2,000 × 1,927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.79 mm150 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.92 in (51 × 49 mm)1.6 mm299 mm25Vinyl, card and thin sheet
3 × 2.89 in (76 × 73 mm)2.4 mm449 mm9Vinyl, card and thin sheet
4 × 3.85 in (102 × 98 mm)3.1 mm598 mm6Any material, including 3 mm wood and acrylic
6 × 5.77 in (152 × 147 mm)4.7 mm898 mm2Any material, including 3 mm wood and acrylic
8 × 7.7 in (203 × 195 mm)6.3 mm1,197 mm1Any material, including 3 mm wood and acrylic
12 × 11.54 in (305 × 293 mm)9.4 mm1,795 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More emoji SVG files

← Thinking emoji with a hand on its chin All 18 emojis Winking emoji with its tongue out →