Free emoji SVG

Crying emoji with streams of tears SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Crying emoji with streams of tears, as a solid black shape
Crying emoji with streams of tears. The preview is the SVG file itself.

A face in full flood: eyes screwed shut, slanted brows, a wailing mouth and two broad streams of tears running down the cheeks. The streams stop short of the edge, so the face stays whole.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length859 mm at this size
Narrowest part1 mm at this size
Nodes121 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm218 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm436 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm655 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm873 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,309 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm1,745 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm2,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More emoji SVG files

← Sad emoji with a tear All 18 emojis Rolling eyes emoji →