Free emoji SVG

Emoji wearing a face mask SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Emoji wearing a face mask, as a solid black shape
Emoji wearing a face mask. The preview is the SVG file itself.

A face in a pleated medical mask with two straps to each ear. The edge of the mask is a slot broken by four bridges, and the two pleats are closed slots, so the mask stays part of the face.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,075 mm at this size
Narrowest part1 mm at this size
Nodes155 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm273 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm546 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm819 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm1,092 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,638 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm2,184 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm3,277 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More emoji SVG files

← Zipper mouth emoji All 18 emojis Party emoji with a hat and blower →