Free Eiffel tower SVG

Eiffel tower outline SVG

Eiffel tower outline, drawn as a line
Eiffel tower outline. The preview is the SVG file itself.

The tower drawn in line: its outline a little over 2 mm wide, both platforms solid and crossed braces running up the legs and the shaft. For colouring pages, foil, engraving and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size64 × 100 mm (2.5 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut32: 1 outer edge and 31 cut-outs
Cut length767 mm at this size
Narrowest part1.6 mm at this size
Nodes200 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,300 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.64 × 1 in (16 × 25 mm)0.41 mm195 mm140Too fine for most machines
1.27 × 2 in (32 × 51 mm)0.81 mm390 mm40Fine detail: vinyl and paper only, weed with care
1.91 × 3 in (48 × 76 mm)1.2 mm584 mm15Vinyl, card and thin sheet
2.54 × 4 in (65 × 102 mm)1.6 mm779 mm8Vinyl, card and thin sheet
3.82 × 6 in (97 × 152 mm)2.4 mm1,169 mm3Vinyl, card and thin sheet
5.09 × 8 in (129 × 203 mm)3.3 mm1,559 mm2Any material, including 3 mm wood and acrylic
7.63 × 12 in (194 × 305 mm)4.9 mm2,338 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eiffel tower SVG files

← Eiffel tower silhouette All 12 Eiffel towers Simple Eiffel tower icon →