Free Eiffel tower SVG

Eiffel tower with a name banner SVG

Eiffel tower with a name banner. The preview is the SVG file itself.

A blank ribbon 100 mm long and 17 mm tall laid across the legs of the tower, with notched ends that reach past the feet. For a name, a date or the word you would write under it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	99 × 100 mm (3.89 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	627 mm at this size
Narrowest part	1.6 mm at this size
Nodes	142 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,977 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.99 × 1 in (25 × 25 mm)	0.41 mm	159 mm	100	Too fine for most machines
1.98 × 2 in (50 × 51 mm)	0.81 mm	319 mm	25	Fine detail: vinyl and paper only, weed with care
2.96 × 3 in (75 × 76 mm)	1.2 mm	478 mm	9	Vinyl, card and thin sheet
3.95 × 4 in (100 × 102 mm)	1.6 mm	637 mm	4	Vinyl, card and thin sheet
5.93 × 6 in (151 × 152 mm)	2.4 mm	956 mm	1	Vinyl, card and thin sheet
7.9 × 8 in (201 × 203 mm)	3.3 mm	1,274 mm	1	Any material, including 3 mm wood and acrylic
11.86 × 12 in (301 × 305 mm)	4.9 mm	1,911 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eiffel tower SVG files

← Eiffel tower with flowers All 12 Eiffel towers Eiffel tower postage stamp →