Free Eiffel tower SVG

Eiffel tower 3D model in two pieces SVG

Eiffel tower 3D model in two pieces, as a solid black shape — Eiffel tower 3D model in two pieces. The preview is the SVG file itself.

Two flat towers that slot together at right angles to stand up: the full tower has a slot rising from the arch and the short cross piece has one cut down from its top. Loose pieces.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 3.01 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	18: 2 outer edges and 16 cut-outs
Cut length	634 mm at this size
Narrowest part	1.8 mm at this size
Nodes	216 curve and line segments

Measured from the file. PNG: 2,000 × 1,546 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.46 mm	161 mm	120	Too fine for most machines
2 × 1.53 in (51 × 39 mm)	0.91 mm	322 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.29 in (76 × 58 mm)	1.4 mm	483 mm	12	Vinyl, card and thin sheet
4 × 3.06 in (102 × 78 mm)	1.8 mm	644 mm	6	Vinyl, card and thin sheet
6 × 4.58 in (152 × 116 mm)	2.7 mm	966 mm	2	Vinyl, card and thin sheet
8 × 6.11 in (203 × 155 mm)	3.7 mm	1,288 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.17 in (305 × 233 mm)	5.5 mm	1,932 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Eiffel tower SVG files

← Paris skyline with the Eiffel tower All 12 Eiffel towers Layered Eiffel tower at sunset →