Mallard duck standing SVG
A mallard drake in profile on two webbed feet: a rounded head, a long bill, the white collar cut as a slit, wing feathers cut in and the curl of feathers over its tail.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 648 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 179 curve and line segments |
Measured from the file. PNG: 2,000 × 1,427 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.66 mm | 165 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.4 in (51 × 36 mm) | 1.3 mm | 329 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.11 in (76 × 53 mm) | 2 mm | 494 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.81 in (102 × 71 mm) | 2.6 mm | 658 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.21 in (152 × 107 mm) | 4 mm | 988 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.62 in (203 × 143 mm) | 5.3 mm | 1,317 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.42 in (305 × 214 mm) | 7.9 mm | 1,975 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Flying duck 
Three ducks flying 
Duck and cattails 
Baby duck 
Mother duck with three ducklings 
Duck head 
Duck face 
Duck outline 