Duck head SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A mallard head and neck in profile, drawn large: a smooth round head, a long flat bill with a nostril, a bright eye and the white collar cut as a band across the neck.
What is in the file
| Size | 100 × 95 mm (3.94 × 3.74 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 548 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 107 curve and line segments |
Measured from the file. PNG: 2,000 × 1,904 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.95 in (25 × 24 mm) | 0.33 mm | 139 mm | 100 | Too fine for most machines |
| 2 × 1.9 in (51 × 48 mm) | 0.66 mm | 278 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.85 in (76 × 72 mm) | 0.99 mm | 418 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.8 in (102 × 97 mm) | 1.3 mm | 557 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.7 in (152 × 145 mm) | 2 mm | 835 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.6 in (203 × 193 mm) | 2.6 mm | 1,114 mm | 1 | Vinyl, card and thin sheet |
| 12 × 11.4 in (305 × 290 mm) | 4 mm | 1,670 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.