Duck and cattails SVG
A mallard swimming past a stand of cattails, with ripples cut into the water. Duck, reeds and water are welded together, so the scene is one piece for a sign, a mug or a mailbox.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.29 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 1,017 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 369 curve and line segments |
Measured from the file. PNG: 2,000 × 1,196 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | 0.48 mm | 258 mm | 150 | Too fine for most machines |
| 2 × 1.16 in (51 × 30 mm) | 0.97 mm | 517 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.75 in (76 × 44 mm) | 1.4 mm | 775 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.33 in (102 × 59 mm) | 1.9 mm | 1,033 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.49 in (152 × 89 mm) | 2.9 mm | 1,550 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.66 in (203 × 118 mm) | 3.9 mm | 2,067 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.98 in (305 × 177 mm) | 5.8 mm | 3,100 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Baby duck 
Mother duck with three ducklings 
Duck head 
Duck face 
Duck outline 
Pair of duck feet 
Rubber duck 
Rubber ducky with bubbles 