Don’t Be Salty stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “DON’T BE SALTY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 1,294 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 259 curve and line segments |
Measured from the file. PNG: 2,000 × 1,427 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.28 mm | 329 mm | 130 | Too fine for most machines |
| 2 × 1.4 in (51 × 36 mm) | 0.56 mm | 657 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.11 in (76 × 53 mm) | 0.84 mm | 986 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.81 in (102 × 71 mm) | 1.1 mm | 1,315 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.21 in (152 × 107 mm) | 1.7 mm | 1,972 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.62 in (203 × 143 mm) | 2.2 mm | 2,629 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.42 in (305 × 214 mm) | 3.4 mm | 3,944 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Be Salty SVG files
-
Don’t Be Salty with a drop shadow Layered · 13 pieces
-
Don’t Be Salty with a palm tree Solid · 12 pieces
-
Don’t Be Salty in Pacifico Solid · 8 pieces
-
Don’t Be Salty in Lobster Solid · 8 pieces
-
Don’t Be Salty in Kaushan Script Solid · 12 pieces
-
Don’t Be Salty in Lilita One Solid · 12 pieces
-
Don’t Be Salty in Alfa Slab One Solid · 12 pieces
-
Don’t Be Salty in Amatic SC Solid · 12 pieces
← Don’t Be Salty outline lettering All 13 Don’t Be Salty designs Don’t Be Salty with a drop shadow →