Don’t Be Salty in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Be Salty” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 51 mm (3.94 × 1.99 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 18: 12 outer edges and 6 cut-outs |
| Cut length | 804 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 217 curve and line segments |
Measured from the file. PNG: 2,000 × 1,048 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.51 in (25 × 13 mm) | 0.58 mm | 204 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.01 in (51 × 26 mm) | 1.2 mm | 408 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.52 in (76 × 38 mm) | 1.8 mm | 613 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2.02 in (102 × 51 mm) | 2.3 mm | 817 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.03 in (152 × 77 mm) | 3.5 mm | 1,225 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.04 in (203 × 103 mm) | 4.7 mm | 1,634 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.06 in (305 × 154 mm) | 7 mm | 2,451 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Be Salty SVG files
-
Don’t Be Salty in Amatic SC Solid · 12 pieces
-
Don’t Be Salty in block capitals Solid · 12 pieces
-
Don’t Be Salty in script and capitals Solid · 11 pieces
-
Don’t Be Salty with stars Solid · 14 pieces
-
Don’t Be Salty outline lettering Outline · 15 pieces
-
Don’t Be Salty stencil plate Solid · one piece
-
Don’t Be Salty with a drop shadow Layered · 13 pieces
-
Don’t Be Salty with a palm tree Solid · 12 pieces
← Don’t Be Salty in Lilita One All 13 Don’t Be Salty designs Don’t Be Salty in Amatic SC →