Free Don’t Be Salty SVG

Don’t Be Salty with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Don’t Be Salty with stars, as a solid black shape
Don’t Be Salty with stars. The preview is the SVG file itself.

“Don’t Be Salty” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size96 × 100 mm (3.79 × 3.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut18: 14 outer edges and 4 cut-outs
Cut length1,208 mm at this size
Narrowest part1.1 mm at this size
Nodes310 curve and line segments

Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.28 mm307 mm100Too fine for most machines
1.93 × 2 in (49 × 51 mm)0.56 mm614 mm25Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)0.84 mm920 mm9Fine detail: vinyl and paper only, weed with care
3.85 × 4 in (98 × 102 mm)1.1 mm1,227 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)1.7 mm1,841 mm2Vinyl, card and thin sheet
7.7 × 8 in (196 × 203 mm)2.2 mm2,455 mm1Vinyl, card and thin sheet
11.56 × 12 in (294 × 305 mm)3.4 mm3,682 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Don’t Be Salty SVG files

← Don’t Be Salty in script and capitals All 13 Don’t Be Salty designs Don’t Be Salty outline lettering →