Free Don’t Be Salty SVG

Don’t Be Salty in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Don’t Be Salty in Lobster, as a solid black shape
Don’t Be Salty in Lobster. The preview is the SVG file itself.

“Don’t Be Salty” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces8 separate pieces
Outlines to cut12: 8 outer edges and 4 cut-outs
Cut length1,018 mm at this size
Narrowest part1.2 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 2,000 × 1,454 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.3 mm259 mm130Too fine for most machines
2 × 1.43 in (51 × 36 mm)0.61 mm517 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.15 in (76 × 55 mm)0.91 mm776 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.86 in (102 × 73 mm)1.2 mm1,034 mm6Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)1.8 mm1,551 mm2Vinyl, card and thin sheet
8 × 5.73 in (203 × 145 mm)2.4 mm2,069 mm2Vinyl, card and thin sheet
12 × 8.59 in (305 × 218 mm)3.7 mm3,103 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Don’t Be Salty SVG files

← Don’t Be Salty in Pacifico All 13 Don’t Be Salty designs Don’t Be Salty in Kaushan Script →