Free Don’t Be Salty SVG

Don’t Be Salty in Amatic SC SVG

Don’t Be Salty in Amatic SC, as a solid black shape — Don’t Be Salty in Amatic SC. The preview is the SVG file itself.

“Don’t Be Salty” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 94 mm (3.94 × 3.72 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	17: 12 outer edges and 5 cut-outs
Cut length	1,392 mm at this size
Narrowest part	2.4 mm at this size
Nodes	435 curve and line segments

Measured from the file. PNG: 2,000 × 1,892 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.94 in (25 × 24 mm)	0.61 mm	354 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.89 in (51 × 48 mm)	1.2 mm	707 mm	25	Vinyl, card and thin sheet
3 × 2.83 in (76 × 72 mm)	1.8 mm	1,061 mm	12	Vinyl, card and thin sheet
4 × 3.78 in (102 × 96 mm)	2.4 mm	1,414 mm	6	Vinyl, card and thin sheet
6 × 5.66 in (152 × 144 mm)	3.7 mm	2,121 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.55 in (203 × 192 mm)	4.9 mm	2,829 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.33 in (305 × 288 mm)	7.3 mm	4,243 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Don’t Be Salty SVG files

← Don’t Be Salty in Alfa Slab One All 12 Don’t Be Salty designs Don’t Be Salty in block capitals →