Free dice SVG

Set of role playing dice SVG

Set of role playing dice, drawn as a line — Set of role playing dice. The preview is the SVG file itself.

The full set as six loose line drawings: four, six, eight, ten, twelve and twenty sides, each with blank faces. Cut them as a row of stickers or scatter them round a character sheet.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	37: 6 outer edges and 31 cut-outs
Cut length	1,782 mm at this size
Narrowest part	2.2 mm at this size
Nodes	187 curve and line segments

Measured from the file. PNG: 2,000 × 1,413 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.7 in (25 × 18 mm)	0.56 mm	453 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.39 in (51 × 35 mm)	1.1 mm	905 mm	35	Vinyl, card and thin sheet
3 × 2.09 in (76 × 53 mm)	1.7 mm	1,358 mm	15	Vinyl, card and thin sheet
4 × 2.78 in (102 × 71 mm)	2.2 mm	1,811 mm	8	Vinyl, card and thin sheet
6 × 4.17 in (152 × 106 mm)	3.4 mm	2,716 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.56 in (203 × 141 mm)	4.5 mm	3,621 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.34 in (305 × 212 mm)	6.7 mm	5,432 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dice SVG files

← Solid 20 sided dice All 13 dice Solid 10 sided dice →