Free dice SVG

Pair of dice SVG

Pair of dice, as a solid black shape — Pair of dice. The preview is the SVG file itself.

Two dice thrown on a table, one resting against the other, each showing three faces. The edges are cut lines that stop short of the outline, and a cut line sets the front die apart, with a bridge left at each end of it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.58 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	23: 1 outer edge and 22 cut-outs
Cut length	938 mm at this size
Narrowest part	1.8 mm at this size
Nodes	189 curve and line segments

Measured from the file. PNG: 2,000 × 1,338 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.46 mm	238 mm	140	Too fine for most machines
2 × 1.31 in (51 × 33 mm)	0.91 mm	477 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)	1.4 mm	715 mm	15	Vinyl, card and thin sheet
4 × 2.62 in (102 × 67 mm)	1.8 mm	953 mm	8	Vinyl, card and thin sheet
6 × 3.94 in (152 × 100 mm)	2.7 mm	1,430 mm	2	Vinyl, card and thin sheet
8 × 5.25 in (203 × 133 mm)	3.7 mm	1,906 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.87 in (305 × 200 mm)	5.5 mm	2,859 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dice SVG files

← Solid 4 sided dice All 13 dice One dice showing three faces →