Free dice SVG

Solid 10 sided dice SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Solid 10 sided dice, as a solid black shape
Solid 10 sided dice. The preview is the SVG file itself.

The ten-sided die: a tall diamond with a kite-shaped face in front and the edges round it cut as lines. Used in pairs for percentages, and a shape people outside the hobby rarely see.

What is in the file

Size87 × 100 mm (3.44 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length638 mm at this size
Narrowest part1.8 mm at this size
Nodes40 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,756 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.46 mm162 mm110Too fine for most machines
1.75 × 2 in (44 × 51 mm)0.91 mm324 mm30Fine detail: vinyl and paper only, weed with care
2.62 × 3 in (67 × 76 mm)1.4 mm486 mm12Vinyl, card and thin sheet
3.49 × 4 in (89 × 102 mm)1.8 mm648 mm6Vinyl, card and thin sheet
5.24 × 6 in (133 × 152 mm)2.7 mm972 mm2Vinyl, card and thin sheet
6.98 × 8 in (177 × 203 mm)3.7 mm1,296 mm1Any material, including 3 mm wood and acrylic
10.48 × 12 in (266 × 305 mm)5.5 mm1,945 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dice SVG files

← Set of role playing dice All 13 dice Solid 12 sided dice →