Free Dear Santa SVG

Dear Santa stencil plate SVG

Dear Santa stencil plate, as a solid black shape — Dear Santa stencil plate. The preview is the SVG file itself.

A rounded plate with “DEAR SANTA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.27 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,505 mm at this size
Narrowest part	1.4 mm at this size
Nodes	155 curve and line segments

Measured from the file. PNG: 2,000 × 1,673 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.36 mm	382 mm	110	Too fine for most machines
2 × 1.66 in (51 × 42 mm)	0.71 mm	765 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.49 in (76 × 63 mm)	1.1 mm	1,147 mm	12	Vinyl, card and thin sheet
4 × 3.32 in (102 × 84 mm)	1.4 mm	1,529 mm	6	Vinyl, card and thin sheet
6 × 4.98 in (152 × 126 mm)	2.1 mm	2,294 mm	2	Vinyl, card and thin sheet
8 × 6.64 in (203 × 169 mm)	2.8 mm	3,058 mm	1	Vinyl, card and thin sheet
12 × 9.96 in (305 × 253 mm)	4.3 mm	4,587 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dear Santa SVG files

← Dear Santa outline lettering All 12 Dear Santa designs Dear Santa with a drop shadow →