Free Dear Santa SVG

Dear Santa in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dear Santa in Lobster, as a solid black shape
Dear Santa in Lobster. The preview is the SVG file itself.

“Dear Santa” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
Pieces4 separate pieces
Outlines to cut8: 4 outer edges and 4 cut-outs
Cut length1,069 mm at this size
Narrowest part1.6 mm at this size
Nodes230 curve and line segments

Measured from the file. PNG: 2,000 × 1,833 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.41 mm272 mm100Too fine for most machines
2 × 1.83 in (51 × 46 mm)0.81 mm543 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.74 in (76 × 70 mm)1.2 mm815 mm12Vinyl, card and thin sheet
4 × 3.65 in (102 × 93 mm)1.6 mm1,086 mm6Vinyl, card and thin sheet
6 × 5.48 in (152 × 139 mm)2.4 mm1,629 mm2Vinyl, card and thin sheet
8 × 7.3 in (203 × 186 mm)3.3 mm2,172 mm1Any material, including 3 mm wood and acrylic
12 × 10.96 in (305 × 278 mm)4.9 mm3,258 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dear Santa SVG files

← Dear Santa in Pacifico All 13 Dear Santa designs Dear Santa in Kaushan Script →