Free Dear Santa SVG

Dear Santa in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dear Santa in Lilita One, as a solid black shape
Dear Santa in Lilita One. The preview is the SVG file itself.

“Dear Santa” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 74 mm (3.94 × 2.89 in), scales to any size
Pieces9 separate pieces
Outlines to cut14: 9 outer edges and 5 cut-outs
Cut length873 mm at this size
Narrowest part4.2 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 1,490 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.74 in (25 × 19 mm)1.1 mm222 mm130Vinyl, card and thin sheet
2 × 1.47 in (51 × 37 mm)2.1 mm443 mm35Vinyl, card and thin sheet
3 × 2.2 in (76 × 56 mm)3.2 mm665 mm15Any material, including 3 mm wood and acrylic
4 × 2.94 in (102 × 75 mm)4.3 mm887 mm6Any material, including 3 mm wood and acrylic
6 × 4.41 in (152 × 112 mm)6.4 mm1,330 mm2Any material, including 3 mm wood and acrylic
8 × 5.88 in (203 × 149 mm)8.5 mm1,774 mm2Any material, including 3 mm wood and acrylic
12 × 8.82 in (305 × 224 mm)13 mm2,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dear Santa SVG files

← Dear Santa in Kaushan Script All 13 Dear Santa designs Dear Santa in Alfa Slab One →