Dear Santa in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Dear Santa” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.6 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 14: 9 outer edges and 5 cut-outs |
| Cut length | 924 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 193 curve and line segments |
Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.81 mm | 235 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.32 in (51 × 34 mm) | 1.6 mm | 469 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.98 in (76 × 50 mm) | 2.4 mm | 704 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.64 in (102 × 67 mm) | 3.3 mm | 939 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.96 in (152 × 101 mm) | 4.9 mm | 1,408 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.28 in (203 × 134 mm) | 6.5 mm | 1,878 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.92 in (305 × 201 mm) | 9.8 mm | 2,816 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Dear Santa SVG files
-
Dear Santa in Amatic SC Solid · 9 pieces
-
Dear Santa in block capitals Solid · 9 pieces
-
Dear Santa in script and capitals Solid · 7 pieces
-
Dear Santa with stars Solid · 10 pieces
-
Dear Santa outline lettering Outline · 14 pieces
-
Dear Santa stencil plate Solid · one piece
-
Dear Santa with a drop shadow Layered · 7 pieces
-
Dear Santa with a Santa hat Solid · 8 pieces
← Dear Santa in Lilita One All 13 Dear Santa designs Dear Santa in Amatic SC →