Free dandelion SVG

Dandelion stencil SVG

Dandelion stencil, as a solid black shape
Dandelion stencil. The preview is the SVG file itself.

A square plate with the dandelion cut out of it: the head, a stem in two lengths and five drifting seeds are all separate openings, so the plate stays in one piece. Dab paint through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,141 mm at this size
Narrowest part2.1 mm at this size
Nodes207 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.53 mm290 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.1 mm580 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.6 mm869 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.1 mm1,159 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)3.2 mm1,739 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)4.3 mm2,319 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)6.4 mm3,478 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dandelion SVG files

← Three dandelion seeds All 14 dandelions Dandelion flower with toothed leaves →