Free dandelion SVG

Dandelion flower with toothed leaves SVG

Dandelion flower with toothed leaves, as a solid black shape
Dandelion flower with toothed leaves. The preview is the SVG file itself.

The yellow flower seen from above, a fringe of slim petals under a row of broader ones, on a stem between two toothed leaves. The leaves give the plant its name: lion tooth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size59 × 100 mm (2.31 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length947 mm at this size
Narrowest part1.1 mm at this size
Nodes478 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,208 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.59 × 1 in (15 × 25 mm)0.28 mm241 mm150Too fine for most machines
1.18 × 2 in (30 × 51 mm)0.56 mm481 mm40Fine detail: vinyl and paper only, weed with care
1.76 × 3 in (45 × 76 mm)0.84 mm722 mm18Fine detail: vinyl and paper only, weed with care
2.35 × 4 in (60 × 102 mm)1.1 mm962 mm8Vinyl, card and thin sheet
3.53 × 6 in (90 × 152 mm)1.7 mm1,443 mm3Vinyl, card and thin sheet
4.7 × 8 in (119 × 203 mm)2.2 mm1,924 mm2Vinyl, card and thin sheet
7.06 × 12 in (179 × 305 mm)3.4 mm2,886 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dandelion SVG files

← Dandelion stencil All 14 dandelions Three dandelions from one root →