Free dandelion SVG

Dandelion seeds on the wind SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dandelion seeds on the wind, as a solid black shape
Dandelion seeds on the wind. The preview is the SVG file itself.

Loose pieces: a half-bare head bent over by the breeze and a stream of eight seeds trailing away from it. Wide and low, for a mantel sign or the top of a letter.

What is in the file

Size100 × 41 mm (3.94 × 1.62 in), scales to any size
Pieces9 separate pieces
Outlines to cut14: 9 outer edges and 5 cut-outs
Cut length620 mm at this size
Narrowest part1.1 mm at this size
Nodes339 curve and line segments
Also found asDandelion seeds blowing SVG

Measured from the file. PNG: 2,000 × 867 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.28 mm157 mm190Too fine for most machines
2 × 0.82 in (51 × 21 mm)0.56 mm315 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.23 in (76 × 31 mm)0.84 mm472 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.64 in (102 × 42 mm)1.1 mm630 mm12Vinyl, card and thin sheet
6 × 2.47 in (152 × 63 mm)1.7 mm945 mm4Vinyl, card and thin sheet
8 × 3.29 in (203 × 84 mm)2.2 mm1,260 mm3Vinyl, card and thin sheet
12 × 4.93 in (305 × 125 mm)3.4 mm1,890 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dandelion SVG files

← Dandelions in grass All 14 dandelions Simple dandelion for children →