Free cupcake SVG

Split cupcake for a name SVG

Split cupcake for a name, as a solid black shape
Split cupcake for a name. The preview is the SVG file itself.

The frosting and the case pulled apart, with a clear band between them for a name. Two pieces: the swirl with its cherry above, the pleated case below.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size55 × 100 mm (2.16 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut12: 2 outer edges and 10 cut-outs
Cut length853 mm at this size
Narrowest part2.7 mm at this size
Nodes94 curve and line segments

Measured from the file. PNG: 1,131 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.55 × 1 in (14 × 25 mm)0.69 mm217 mm160Fine detail: vinyl and paper only, weed with care
1.1 × 2 in (28 × 51 mm)1.4 mm433 mm45Vinyl, card and thin sheet
1.64 × 3 in (42 × 76 mm)2.1 mm650 mm18Vinyl, card and thin sheet
2.19 × 4 in (56 × 102 mm)2.7 mm867 mm10Vinyl, card and thin sheet
3.29 × 6 in (84 × 152 mm)4.1 mm1,300 mm3Any material, including 3 mm wood and acrylic
4.38 × 8 in (111 × 203 mm)5.5 mm1,733 mm2Any material, including 3 mm wood and acrylic
6.58 × 12 in (167 × 305 mm)8.2 mm2,600 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cupcake SVG files

← Cupcake monogram frame All 16 cupcakes Cupcake frosting swirl with a cherry →