Free cupcake SVG

Cupcake liner SVG

Cupcake liner, as a solid black shape
Cupcake liner. The preview is the SVG file itself.

Just the paper case: a tapered cup with a frilled top edge and six pleats. Pair it with the frosting swirl, or use it as the base of a paper cupcake.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 81 mm (3.94 × 3.2 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,062 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes81 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,640 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 21 mm)Over 1.5 mm270 mm120Vinyl, card and thin sheet
2 × 1.63 in (51 × 41 mm)Over 3 mm539 mm30Any material, including 3 mm wood and acrylic
3 × 2.44 in (76 × 62 mm)Over 4.6 mm809 mm12Any material, including 3 mm wood and acrylic
4 × 3.25 in (102 × 83 mm)Over 6.1 mm1,079 mm6Any material, including 3 mm wood and acrylic
6 × 4.88 in (152 × 124 mm)Over 9.1 mm1,618 mm2Any material, including 3 mm wood and acrylic
8 × 6.5 in (203 × 165 mm)Over 12 mm2,158 mm1Any material, including 3 mm wood and acrylic
12 × 9.76 in (305 × 248 mm)Over 18 mm3,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cupcake SVG files

← Cupcake frosting swirl with a cherry All 16 cupcakes Muffin with berries →