Free cupcake SVG

Cupcake with swirl frosting and a cherry SVG

Cupcake with swirl frosting and a cherry, as a solid black shape
Cupcake with swirl frosting and a cherry. The preview is the SVG file itself.

Three rolls of piped frosting that narrow as they rise, a cherry on top and a pleated paper case underneath. Each roll is set off by a cut line that stops short of the edge.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size65 × 100 mm (2.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length902 mm at this size
Narrowest part3.2 mm at this size
Nodes95 curve and line segments

Measured from the file. PNG: 1,331 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.65 × 1 in (17 × 25 mm)0.81 mm229 mm140Fine detail: vinyl and paper only, weed with care
1.3 × 2 in (33 × 51 mm)1.6 mm458 mm40Vinyl, card and thin sheet
1.96 × 3 in (50 × 76 mm)2.4 mm687 mm15Vinyl, card and thin sheet
2.61 × 4 in (66 × 102 mm)3.3 mm916 mm8Any material, including 3 mm wood and acrylic
3.91 × 6 in (99 × 152 mm)4.9 mm1,375 mm2Any material, including 3 mm wood and acrylic
5.22 × 8 in (132 × 203 mm)6.5 mm1,833 mm2Any material, including 3 mm wood and acrylic
7.82 × 12 in (199 × 305 mm)9.8 mm2,749 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cupcake SVG files

← Layered cupcake in four colours All 16 cupcakes Cupcake silhouette →